The head is used to spray the liquid in the form of aer […]
The head is used to spray the liquid in the form of aerosol, so that it can be spread to the liquid on a large scale, and the aerosol is very uniform and absorbed well. These are just some of the strengths. The usual spray heads are considered for planning flexibility, and the size of the aerosol spray and the size of the masking scale can be changed according to the needs of the customer.
The spray pump head has undergone a series of transformation and processing by relevant professionals, so that it can easily cope with the time when it sprays relatively viscous liquid. After the operator adjusts the pump head according to the needs, although the size of the aerosol sprayed has been changed, it will not affect the total sprayed amount and then the operating power, so the brothers who need to use need not worry about this.
The reason for choosing a spray pump head is water flow, spray point of view, etc., and these elements are usually mutually controlled. Water flow and pressure, spray viewpoint and masking scale are all proportional. The eruption purpose of each pump head is to continue to make the tank fluid and the workpiece come into contact, during which the flow rate is somewhat more important than the pressure.
Although the temperature of the liquid does not affect the spray performance of the pump head, it affects the viscosity and specific gravity, and it also affects the choice of data. The raw material of the pump head should also be determined according to the chemical characteristics of the bath fluid. For the bath fluid without corrosive effect, it can be made by bronze casting or plastic pressing according to the difficulty of manufacturing.