Is the working principle of the spray pump head the same as the ordinary cosmetic pressure pump?

Update:26 Oct 2020
Summary:

Is the working principle of the spray pump head the sam […]

Is the working principle of the spray pump head the same as the ordinary cosmetic pressure pump?

Answer: It's not the same, it's definitely different. The reasons are as follows:

 

 

The effect of the spray pump head is that the sprayed liquid must be atomized, and the quality requirement standard of the spray pump is based on the atomization effect. The better the atomization effect, the quality standard of the spray pump The higher it is, of course, in addition to this, there is also the issue of range. The stronger the bursting force, the farther the spray distance will be, and the stronger the spray will be. Relatively speaking, the atomization effect of spray pump will be better. There is also the problem of spray angle. The working principle of spray pumps. Generally, spray pump manufacturers require that between 30 degrees and 45 degrees, because only this angle can be more focused and atomized, and the sprayed liquid becomes mist and also Strong, if the angle is too large, the atomization will appear weak and loose, the mist will become water droplets, and the mine spray pump will be too weak to drip, so that the spray will be uneven and the receiver will not float